How to Install and Use OP COM China Clone 2012 Software 12
OP COM is a diagnostic tool for Opel/Vauxhall vehicles. It can read and clear fault codes, display live data, program new keys, reset service intervals, and more. However, the original OP COM is quite expensive and hard to find. That's why many users opt for a cheaper alternative: the OP COM China clone.
The OP COM China clone is a copy of the original device that works with a modified software version. The software version 12 is one of the most popular and stable versions for the OP COM China clone. It supports most Opel/Vauxhall models from 1990 to 2012.
In this article, we will show you how to install and use the OP COM China clone 2012 software 12 on your Windows PC. Follow the steps below and you will be able to diagnose your car in no time.
Step 1: Download and Extract the Software
The first step is to download the OP COM China clone 2012 software 12 from a reliable source. You can find it on various websites and forums, but make sure you scan it for viruses before opening it. Alternatively, you can buy a CD or USB drive with the software from online sellers.
Once you have the software file, you need to extract it to a folder on your PC. You can use any extraction tool such as WinRAR or 7-Zip. The extracted folder should contain several files and subfolders, such as Drivers, OPCOM.exe, OPCOM.ini, etc.
Step 2: Install the Drivers
The next step is to install the drivers for the OP COM China clone device. This will allow your PC to recognize and communicate with the device when you connect it via USB.
To install the drivers, follow these steps:
Connect the OP COM China clone device to your PC via USB.
Go to Device Manager on your PC. You can access it by right-clicking on My Computer or This PC and selecting Manage.
Find the device under Other Devices or Unknown Devices. It should have a yellow exclamation mark next to it.
Right-click on the device and select Update Driver Software.
Select Browse my computer for driver software.
Browse to the Drivers folder in the extracted software folder and click Next.
Wait for the installation to complete. You should see a message saying that the driver was successfully installed.
Close Device Manager and unplug the device from your PC.
Step 3: Run the Software
The final step is to run the OP COM China clone 2012 software 12 on your PC. To do this, follow these steps:
Go to the extracted software folder and double-click on OPCOM.exe.
You should see a window with several options. Select Interface Test to check if your device is working properly.
If you see a green message saying Interface Communication OK, then your device is ready to use. If you see a red message saying Interface Communication Error or No Interface Found, then you need to check your connection and drivers.
Close the Interface Test window and select Diagnostics from the main window.
Select your vehicle model and year from the drop-down menus.
Select System Scan or Manual Selection to choose which system you want to diagnose.
Follow the on-screen instructions to read and clear fault codes, display live data, program new keys, reset service intervals, and more.
Congratulations! You have successfully installed and used the OP COM China clone 2012 software 12 on your PC. Now you can enjoy all the benefits of a professional diagnostic tool at a fraction of the cost.
If you have any questions or problems with the software or device 0efd9a6b88